Construction

 ANTI-TERMITE DAMP-PROOF COURSE

Anti-Termite Brikgrip® DPC 3-layer 250 micrometer is an SABS approved damp proof course that is utilised in preventing rising damp in walls, as well as efflorescence and flaking of the wall covering.

The sheeting is tear and puncture resistant and contains a pesticide which makes it termite resistant, creating an essential barrier to protect your home from the outset.

Anti-Termite GREEN USB 3-LAYER 250® sheeting is tear and puncture resistant to prevent rising damp through the floor slab, it is also termite resistant, creating an essential barrier to protect your home.

Download the PDF for more information about Anti-Termite membranes:

Download Anti-Termite Brochure

TANKING MEMBRANE:

HYPERLASTIC ORANGE

BASEMENT TANKING

The waterproofing of a basement is dependent on the structural design. Swazi Plastic Industries Tanking Membrane keeps your basement dry and keeps the damp from seeping into the walls when a portion of your house is underground or built against a hill, where you are most likely to have a high moisture content. Available are widths of 3m and 4m, in 30m lengths.

SPECIFICATION

One layer of 375μm HYPERLASTIC ORANGE® waterproof sheeting bearing SABS 952-1 2011 Type A. Joining: All joining shall be carried out strictly in accordance with the manufacturer’s instructions.

Tanking2
Tanking2

SWAZI PLASTIC INDUSTRIES SABS RANGE OF 3 LAYER CONSTRUCTION MEMBRANE

Multi-layer co-extrusion has the following advantages:

  • It has a cross-linking effect between the different layers, which gives the sheeting added strength. This means that co-extruded sheeting of 170 or 180 microns in thickness is stronger than a mono-film of 250 microns in thickness.
  • Each layer can have a different formulation. For instance, the top layer can be UV stabilised while the bottom layer can contain anti-oxidants to prevent breakdown caused by heat exposure.

Swazi Plastic Industries CERTIFIED PRODUCTS – DAMP AND WEATHERPROOFING MEMBRANES

ContructionP4

CO-EXTRUDED FILMS

The following is an extract from the SABS 952 specification covering co-extruded films.

DampProof

Download the PDF for more information about Swazi Plastic Industries Co-Extruded Films:

DOWNLOAD CO-EXTRUDED FILMS BROCHURE

USB MEMBRANE 170 CO-EXTRUDED

UNDER-SURFACE BEDS

USB GREEN 3 LAYER 170® is co-extruded, consisting of the following: Outer layer – Black low-density polyethylene containing carbon black, which is a natural ultra-violet inhibitor. Middle layer – Black low-density polyethylene. Outer layer – Green low-density polyethylene, which allows for easy identification on site and has enhanced puncture resistance.

Note: Because of their high carbon content, USB Green 3 LAYER 170® can also be used where SABS black sheeting is specified, as it exceeds the minimum specification required for SABS black.

SPECIFICATION

One layer of USB Green 3 LAYER 170® damp proof sheeting bearing SABS 952 – 1 : 2011 shall be laid in the widest practical widths to minimise joints and shall be turned up, dressed to load bearing walls, and lapped with Brickgrip SABS DPC. Gunplas USB Green 3 layer 170® may be lapped according to specifications.

BENEFITS

  • Prevents rising damp
  • Prevents contamination of concrete
  • Prevents efficiency loss of under-floor insulation
  • Specially formulated as a damp-proof membrane
  • Good puncture resistance
  • Good tear strength
  • Wide widths

SOLID WALL CONSTRUCTION

USB1

INSTALLATION OF CO-EX MEMBRANES

USB2

SWAZI PLASTIC INDUSTRIES LIQUID RUBBER PRODUCTS

Swazi Plastic Industries represents one of the world’s preeminent manufacturers and suppliers of waterproofing, corrosion protection and fireproofing products for roofing, metal and concrete applications. All Liquid Rubber products are environmentally safe, non-hazardous and easy for contractors to use. Our strategy adds value to customers in the global waterproofing, corrosion protection and fireproofing markets through environmentally safe solutions which incorporate Liquid Rubber products, equipment and the use of labor in a way that guarantees a better cost/benefit ratio than competitive products.

Download the PDF for more information about Swazi Plastic Industries Liquid Rubber Products

DOWNLOAD LIQUID RUBBER PRODUCTS BROCHURE

WHOLESALE PRODUCTS AND RETAIL PRODUCTS

UNDER-SURFACE BEDS

Our products can be used for a wide range of applications. All product cure to provide a seamless, fully adhered flexible membrane which prevents water entering and resists damage from water, UV rays, salt, thermal cycling and harmful chemicals. All our products are both human and environmentally safe, and are available for commercial, industrial and residential markets. Application include waterproofing planter boxes/roof gardens, concrete decks, shower stalls, balconies, tanks, tin roofs, gutters and more.

PRODUCTS LIST

  • Waterproof Primer
  • Heavy Duty Waterproofing
  • Waterproof Sealant
  • Non-Slip Acrylic
  • CPC 500TM
  • CPC 550TM
  • WSC 700
  • WSC 750
Swazi Plastic Industries Waterproofing Products